Skip to content

Home Impression Kit and Prepaid Return Label Included With Every Custom OrderImpression Kit + Return Label Included

(719) 271-4528

(719) 271-4528Cart

Can Chemicals at Work Make Noise Harder on Your Ears?

Some solvents, metals and fumes can affect hearing, and noise plus chemicals can do more harm. What studies found and simple steps to protect your ears.

By Stone Hood8 min read

Guardian Transformer Guardian Max Guardian Vanquisher_

If you work around paints, solvents, fuels or exhaust and the job is loud too, your ears may be dealing with two things at once. Research summarised by NIOSH and OSHA shows that some workplace chemicals can damage hearing on their own, and that noise plus those chemicals can do more harm than either one alone. The good news is that the same habits that help protect you from noise, plus a few simple chemical-safety steps, cover most of what you can do.

Quick answer

  • Yes, it can happen: chemicals called ototoxicants (some solvents, metals, asphyxiants such as carbon monoxide, and certain medicines) can affect the inner ear and the hearing nerve.
  • Noise plus chemicals: NIOSH says the combination can cause more hearing damage than either exposure by itself.
  • The surprise: in one study of printing workers, 53% of those exposed to noise and toluene had high-frequency hearing loss, about double the noise-only group.
  • What helps: less chemical exposure (ventilation, gloves, the right respirator), hearing protection you actually keep in, and regular hearing tests even if your noise level seems moderate.

Why does my hearing seem worse than the noise explains?

It’s a fair question for anyone working in a print shop, on a paint line, in a boat yard or at a fuel dock. The noise at work doesn’t feel extreme, yet a hearing test shows a dip, or speech in a busy room has started to sound smeared.

One possible piece of the puzzle is chemical exposure. NIOSH’s page on chemical-induced hearing loss explains that certain chemicals can damage different parts of the ear, and that “sometimes, exposure to chemicals can make ears more sensitive to the harmful effects of noise.” They can enter the body when you breathe them in, swallow traces from contaminated food or drink, or absorb them through your skin. From there they travel in the blood to the inner ear and the nerves that carry sound to the brain.

Plenty of other things affect hearing too, so a change is a reason to talk to a doctor or audiologist, not to guess. If you notice sudden hearing loss, ear pain, or ringing that is new or getting worse, please see a doctor or audiologist promptly.

Which chemicals are we talking about?

The joint OSHA and NIOSH safety bulletin on ototoxicity and noise groups the known examples into five families:

  • Solvents such as toluene, xylene, styrene, ethylbenzene, n-hexane and trichloroethylene
  • Asphyxiants such as carbon monoxide, hydrogen cyanide and tobacco smoke
  • Metals and compounds such as lead, mercury compounds and organic tin compounds
  • Nitriles such as acrylonitrile
  • Some pharmaceuticals, including certain antibiotics and cancer drugs

They turn up in manufacturing, mining, utilities, construction and agriculture. The bulletin names jobs that often combine them with noise: printing, painting, fueling vehicles and aircraft, firefighting, weapons firing and pesticide spraying.

If you take a medicine and wonder about your hearing, please don’t stop or change it on your own. Ask the doctor or pharmacist who prescribed it.

What did the research actually find?

A 1993 study by Thais Morata and colleagues, cited in that bulletin, is a good place to start; NIOSH keeps its summary in the CDC library. The team gave hearing tests to four groups of workers in Brazil:

Group (workers)ExposureBilateral high-frequency hearing loss
Comparison (50)No solvents, no excessive noise8%
Noise only (50)88–97 dBA in a printing plant26%
Mixed solvents (39)Paint factory solvents, no excessive noise18%
Noise plus toluene (50)88–98 dBA and toluene in rotogravure printing53%

Look at that last row. Workers with both exposures had about twice the rate of the noise-only group, even though the noise levels were similar. The authors concluded that toluene and mixed solvents raised the risk of noise-induced hearing loss, and that the risk was greatest with toluene and noise together.

It’s a small study, so it can’t tell you your personal risk, and later work is more mixed. A 2019 analysis of U.S. national health survey data by Staudt and colleagues measured solvent levels in the blood of more than a thousand adults. Higher benzene, ethylbenzene and toluene levels were linked with higher odds of high-frequency hearing loss (for toluene, an odds ratio of 1.27). But that study found no link with tinnitus and no statistically significant interaction with work noise.

The fair summary: solvents are linked with hearing loss, and some studies show noise plus solvents is worse than noise alone. How much worse depends on the chemical, the dose, the noise and the person.

Can chemicals cause hearing damage below the usual limits?

They might, and that is the part that matters most for workers in moderately loud jobs. The OSHA and NIOSH bulletin notes that several studies suggest some solvents may worsen noise-induced hearing loss even when the noise is below OSHA’s permissible exposure limit. NIOSH adds that exposure limits for many chemicals were set without looking specifically at hearing.

The bulletin also notes that because these chemicals can affect nerve pathways, sounds can lose clarity as well as volume. That can make it harder to pick out a voice from background noise, hear a warning signal, or tell where a sound is coming from. A standard hearing test shows that something changed, but it can’t tell you whether noise or chemicals caused it.

That’s why the bulletin suggests hearing protection and hearing tests even for workers below the noise action level when ototoxic chemicals are present. If you’d like to understand your results, our guide to what a hearing test shows walks through an audiogram line by line.

What can you do about it tomorrow?

Start with the chemicals, because earplugs don’t stop solvents. NIOSH and OSHA list these steps, roughly in order of how well they work:

  • Swap in a less toxic product where you can, and improve ventilation.
  • Check the Safety Data Sheet (SDS) for the products you use. Look for hearing or ototoxic effects among the listed health hazards.
  • Wear chemical-resistant gloves, long sleeves and eye protection, since many of these chemicals pass through skin.
  • Wear a properly selected respirator where your employer’s program calls for one.
  • Keep food and drinks away from the work area and wash up before eating, since NIOSH lists contaminated food and drink as one way these chemicals get in.

Then turn down the noise reaching your ears. NIOSH’s hearing protection guidance says most workers need 10 dB or less of reduction, and suggests aiming for 75–85 dBA at the ear rather than blocking everything. It recommends earmuffs over earplugs at 100 dBA or above, or with impulse noise. And it reminds us that “comfort is the key to consistent use,” because protection only works while it’s in.

One practical detail for chemical work: think about what’s on your fingers when you put earplugs in. NIOSH notes that foam earplugs must be rolled with your fingers before insertion, which makes them a poor choice for on-and-off use at dirty worksites. Clean hands first, every time.

Which hearing protection works best around chemicals and noise?

There’s no single right answer. Here’s how the main types compare in a chemical environment.

TypeGood forWatch out for
Foam earplugsLow cost, high protection when rolled and inserted well; a fine choice for clean, steady noiseNeed rolling with fingers, so harder to use with dirty or contaminated hands
Pre-formed earplugsNo rolling, easy to pop in and outSized to fit most ears, so some people can’t get a good seal
EarmuffsOften easier to fit, easy on and off, no hands in the ear canalHeavier, warm, and can clash with respirators, eye protection or hardhats
Custom earplugsMade from impressions of your ears, no rolling, comfortable for long shifts; NIOSH says they cost more at the outset but are more durable and last longerHigher upfront cost and a wait while they’re made
Earplugs plus earmuffsVery loud work (100 dBA or more) or impulse noiseEasy to overprotect in moderate noise

If foam or muffs already work for you and stay on all shift, stick with them. Custom makes sense when generic plugs hurt, won’t stay seated, or no size you’ve tried feels right.

How does Big Ear help with noisy chemical work?

To be clear, our earplugs only handle the noise half of this. They do nothing about solvents, so the ventilation, gloves and respirator steps above still come first.

For the noise half, we hand-build custom earplugs from impressions of your ears. Because they’re shaped to you, there’s nothing to roll; you seat them by their shape. Every earplug lasts 7 to 10 years with care.

  • The One is our filtered earplug. It uses a two-part, analog filter system: a non-linear filter in the canal in every pair, plus interchangeable flat filters of 9, 15, 20, 25 or 30 dB. It’s rated NRR 25 dB with one filter installed. Lighter filters suit moderate noise where you need to hear coworkers; for shop-floor levels, call us and we’ll talk through which filter fits your work. Kits are $224.95 (one filter set), $299.95 (two) or $574.95 (all five).
  • Guardian Max ($149.95) is a specialty industrial plug that helps you hear what’s around you in very loud work.
  • Guardian Vanquisher ($179.95) is a semi-soft solid plug rated NRR 37 dB for the loudest jobs. In moderate noise it may be more than you need.

Setting this up for a crew? See our industrial hearing protection page, and our fit test explainer for checking any earplug’s real-world seal.

Frequently asked questions

Do earplugs protect me from solvent fumes?

No. Earplugs reduce sound only. Chemical exposure is reduced with substitution, ventilation, gloves and protective clothing, and a properly selected respirator when needed.

My job isn’t that loud. Should I still wear hearing protection?

If you work with known ototoxic chemicals, the OSHA and NIOSH bulletin suggests hearing protection and hearing tests even below the usual noise action level. Your safety lead or occupational health provider can help decide what fits your job.

How do I keep earplugs clean in a chemical workplace?

Wash and dry your hands before handling them, keep them in their case, and follow your workplace’s rules for anything that has been contaminated.

Ready to find a pair that stays in all shift?

If generic plugs aren’t working for you, have a look at Find my pair, or call us at (719) 271-4528 and tell us about your work. Every order includes a Home Impression Kit, which arrives in 3 to 5 business days; impressions take about 15–20 minutes, and return postage is paid. Your earplugs are built in 40 business days from the day your impressions reach our lab, with $10 order shipping and our 30-Day Fit Warranty.

Sources

Made for this

Custom protection for what you just read about

Stone Hood
Big Ear, Inc. Custom hearing protection, hand-built in the USA since 2003.

Keep reading

Translate »
×

Cart

<<< Sign In or Create an Account >>>

With an account you can check out faster, view your online order history and access your shopping bag or saved items from any device.

<<< View Your Items Here >>>

Choose By Category

Explore All products >>

Choose By Category

Explore All products >>

Choose By Category

Explore All products >>

Choose By Category

Explore All products >>

Choose By Category

Explore All products >>

Choose By Category

Explore All products >>