Skip to content

Home Impression Kit and Prepaid Return Label Included With Every Custom OrderImpression Kit + Return Label Included

(719) 271-4528

(719) 271-4528Cart

How Can Airport Ground Crews Protect Their Hearing Around Jets?

Airport ramp noise can top 116 dBA near a running APU. Here is what NIOSH found and how custom earplugs can help ground crews protect their...

By Stone Hood6 min read

Guardian Transformer Guardian Max Guardian Vanquisher_

Airport ground crews can protect their hearing by wearing protection every minute they’re on the ramp, doubling up near the loudest sources, and choosing gear comfortable enough to keep in all shift. A NIOSH noise survey of ramp workers found full-shift exposures above the NIOSH recommended limit, with the area behind a running auxiliary power unit among the loudest spots. Custom earplugs made from your own ear impressions can make that all-day habit easier to keep.

Here’s what the measurements showed, why fit and comfort matter so much on the ramp, and how to put together protection that works with your radio.

Quick answer

  • How loud: a NIOSH survey measured 116–120 dBA at the tail of regional jets with the APU running, and full-shift exposures of 88–94 dBA.
  • What NIOSH suggested: hearing protection whenever you’re on the ramp, and earmuffs over well-fitted earplugs for work near a running APU.
  • Why fit matters: protection only works if it seals well and stays in for the whole shift.
  • From Big Ear: The One with 25 or 30 dB filters for work around aircraft, the NRR 37 Guardian Vanquisher, and a custom radio earpiece.
  • See a doctor or audiologist if you notice new or worsening ringing, ear pain, or a change in your hearing.

How loud is it on an airport ramp?

In 1999, NIOSH investigators spent several days with ramp employees at a large East Coast airport. Six workers wore noise dosimeters for a full shift, and every one of them was above the NIOSH recommended exposure limit, with eight-hour averages of 88 to 94 dBA. The loudest moments during sampling reached 111 to 116 dBA.

The biggest source was the auxiliary power unit (APU) on a regional jet, which vents near the tail. With it running, the team measured 116 to 120 dBA, which the report described as “at least 18 dB(A) louder” than any of the other planes measured. Switching the aircraft to ground power brought levels down to near 90 dBA.

That’s one airport and one fleet, more than 25 years ago, so your ramp may be quieter or louder. The pattern is still useful: noise on the ramp isn’t steady, and a few minutes beside the wrong part of the wrong aircraft can do a lot of the day’s damage.

What does a full shift at those levels mean?

NIOSH recommends keeping exposure to 85 dBA averaged over an eight-hour day. For every 3 dBA above that, it recommends cutting the time in half. Here’s how that plays out:

Average levelNIOSH recommended maximum time
85 dBA8 hours
88 dBA4 hours
91 dBA2 hours
94 dBA1 hour

The 88–94 dBA shift averages from the airport survey sit right in this range. The National Institute on Deafness and Other Communication Disorders adds that long or repeated exposure to sounds at or above 85 dBA can cause hearing loss, so years on the ramp count, too.

Is any hearing protection good enough?

Not always, and this part of the report is worth a close look. The investigators worked out how much each type of protector on hand would reduce the regional jet noise. Earmuffs and earplugs brought it down to roughly 78–82 dBA on paper. Semi-insert banded protectors only got it to about 84–89 dBA, and the report said they could be “potentially hazardous” for a full shift near that noise.

Those were calculations from lab data with no allowance for real-world fit, so the report noted actual levels would likely be higher. It also observed that crews weren’t wearing protection all the time. NIOSH’s recommendations included:

  • keep workers away from running APUs where possible;
  • when mechanics must work near one, use double protection, earmuffs over well-fitted earplugs;
  • wear hearing protection whenever you’re on the ramp;
  • make yearly hearing tests easy for every employee.

Your employer’s hearing program and noise survey come first. Follow them, and use the rest of this post to pick gear you’ll actually keep in.

Why do crews take their protection out?

Two big reasons: comfort and communication. NIOSH says plainly that comfort is the key to consistent use, and that workers “might take off their hearing protectors to hear properly” if protection blocks too much speech or warning sound.

The ramp is hard on both. Earmuffs are heavier and can feel hot in warm weather, which NIOSH notes is one reason earplugs often suit hot conditions better. A radio earbud can fight with a plug for the same ear. Gear shaped to your own ear takes away some of that friction.

How does Big Ear help ground crews?

We hand-build every pair in the USA from impressions of your own ears. For work around aircraft, these are the options we’d look at with you:

ProductBest forKey factsPrice
The OneAll-day ramp work where you still need to hear peopleInterchangeable flat filters (9–30 dB); NRR 25 dB with one filter installed; we suggest 25 or 30 dB around aircraft$224.95 Standard, $299.95 Select, $574.95 Premium
Guardian VanquisherThe loudest jobs, and wearing under earmuffsSolid, semi-soft Shore A 45 silicone, NRR 37 dB$179.95
Guardian MaxVery loud work where you still want to hear what’s around youSpecialty industrial earplug$149.95
Custom Single Ear Radio EarpieceCrews on a radioSingle-sided custom earpiece molded to your ear$105

The One uses a two-part, analog, non-electronic filter system: a non-linear filter in the canal of every pair, plus a flat filter on the outside that swaps in seconds with no new mold. The Select kit gives you two filter sets, so one pair covers two noise levels, for example a 25 dB filter for the gate and a 30 dB filter for the tail.

NIOSH also warns against overprotection, since too much reduction can make you less aware of your surroundings. Its aim is to bring exposure down to about 75–85 dBA. That’s why filters you can change are handy: you match the protection to the job instead of using the strongest plug for everything.

If you work near a running APU or engines, follow NIOSH’s double-protection advice. A custom plug sits inside your ear, so the muff can close over it; the Vanquisher or The One both work this way. Our earplugs, earmuffs or both guide explains how to choose.

Buying for a whole crew? Our guide to setting up custom hearing protection for a team walks through the steps, and you’ll find more on our industrial hearing protection page.

How can you check that your ears are doing okay?

Regular hearing tests help you spot changes early, which is why NIOSH suggested yearly tests for the ramp crews. Our post on what a hearing test shows explains how to read an audiogram.

The NIDCD notes that loud noise can cause ringing, buzzing or roaring in the ears (tinnitus), and a temporary hearing loss that lasts 16 to 48 hours. If you notice ringing that’s new or getting worse, ear pain, or a sudden change in your hearing, please see a doctor or audiologist.

Frequently asked questions

Which filter should I use on the ramp?

We suggest 25 or 30 dB filters for work around aircraft. If part of your day is quieter, a second filter set lets you step down for those hours.

Can I wear custom earplugs under earmuffs?

Yes. NIOSH recommends earmuffs over earplugs for very high noise, and a custom plug sits within your ear so the muff can close over it.

How do you get my ear impressions?

Your order includes a Home Impression Kit with a guided video. It ships in 2–3 business days, takes about 15 to 20 minutes with a helper, and the return postage is paid. If an impression can’t be used, we send a second kit at no charge. Your earplugs are built in 40 business days from the day the impressions reach our lab.

What if they don’t fit right?

Our 30-Day Fit Warranty means you tell us within 30 days of delivery and we’ll make it right. There’s also a 1-year manufacturer defect warranty against manufacturing defects (loss isn’t covered). Custom products can’t be returned, since they’re made for your ears.

Ready to make the ramp a little quieter?

Order with the included Home Impression Kit, or try Find my pair to match your job to the right earplugs. Prefer to talk to a person? Call us at (719) 271-4528. Order shipping is $10, and we keep your impressions on file for up to ten years for easy reorders.

Sources

Made for this

Custom protection for what you just read about

Stone Hood
Big Ear, Inc. Custom hearing protection, hand-built in the USA since 2003.

Keep reading

Translate »
×

Cart

<<< Sign In or Create an Account >>>

With an account you can check out faster, view your online order history and access your shopping bag or saved items from any device.

<<< View Your Items Here >>>

Choose By Category

Explore All products >>

Choose By Category

Explore All products >>

Choose By Category

Explore All products >>

Choose By Category

Explore All products >>

Choose By Category

Explore All products >>

Choose By Category

Explore All products >>