Skip to content

Home Impression Kit and Prepaid Return Label Included With Every Custom OrderImpression Kit + Return Label Included

(719) 271-4528

(719) 271-4528Cart

What Earplugs Work for Orchestra and Classical Musicians?

Orchestra and classical musicians: how flat-filter earplugs protect your hearing while keeping tone and balance true, and how to pick a filter level.

By Stone Hood7 min read

A pair of yellow swirl The One custom filtered earplugs on a black background

Orchestra and classical musicians usually do best with flat-attenuation earplugs, often called musicians’ earplugs, because they turn the whole sound down evenly instead of muffling the high notes. Research on orchestras shows that exposure depends a lot on where you sit and what you play, so the right amount of protection is personal. A custom filtered earplug, made from impressions of your own ears, lets you pick that amount and keep the music sounding like music.

Quick answer

  • Is classical music loud enough to matter? It can be. Long or repeated exposure at or above 85 dBA can cause hearing loss, and a large German study found professional musicians had a higher risk of noise-induced hearing loss than the general population.
  • Who is most exposed? In a Toronto orchestra study, woodwinds and brass had the highest averages and the strings the lowest.
  • What kind of earplug? Flat-attenuation filters lower all pitches by about the same amount, so balance and tone stay intact.
  • How much protection? Usually less than you think. NIOSH suggests aiming for about 75–85 dBA at the ear, not total silence.
  • Our pick: The One, with interchangeable filters from 9 to 30 dB.

Can playing in an orchestra damage your hearing?

It can, though the risk depends on the person and the seat. Rock gets the reputation, but research on orchestras shows that classical players spend long hours around a lot of sound too, and for some of them it adds up.

For context, the NIDCD says sounds at or below 70 dBA are unlikely to cause hearing loss, even over long periods, while long or repeated exposure at or above 85 dBA can. It also notes that the tiny hair cells in the inner ear don’t grow back once they are damaged.

A large German study adds a wider view. Using health insurance records covering about 7 million people, researchers found that professional musicians had roughly 3.6 times the risk of a noise-induced hearing loss diagnosis compared with the general population, and about 57% higher risk of tinnitus (Schink and colleagues, 2014). Musicians were a small group in that data (2,227 people), so it’s best read as a signal worth acting on rather than a precise number. The authors’ advice was simple: use the prevention measures that already exist, including in-ear hearing protection.

Which sections of the orchestra get the most sound?

Where you sit changes everything. In a long-running study of the National Ballet of Canada Orchestra in Toronto, brass, percussion and basses, and woodwinds all had higher exposure than the strings. Sitting just in front of the trumpets or beside the timpani is a very different day from the back of the violas.

A five-year follow-up of that orchestra measured average exposure by section. The researchers adjusted the numbers to the musicians’ contracted playing hours, about 360 hours a year (Behar and colleagues, 2018):

SectionAverage exposure (dBA, adjusted to 360 playing hours a year)
Violins77.5
Viola and cello78.7
Percussion and basses79.9
Brass81.7
Woodwinds82.0

Here’s the encouraging part. Those averages stayed below 85 dBA, most players’ hearing was in the normal range, and the authors judged the average risk to be small. They also noticed something worth remembering: the groups with the highest exposure had the most hearing loss, so noise may still be a long-term risk for some players. Add private practice, teaching, pit work, summer festivals and the odd loud night out, and your personal total can climb well past what one orchestra job shows.

Why do regular earplugs make music sound wrong?

Many everyday earplugs block high pitches more than low ones. That’s fine for a lawn mower. For a violinist trying to hear intonation, it can make the orchestra sound dull and boomy, and your own instrument may sound strange inside your head.

Flat-attenuation protectors are built to avoid that. According to the NIOSH hearing protection guidance, these devices, sometimes called “musicians’ earplugs,” reduce sound evenly across frequencies, which keeps the sound true to the original. NIOSH also says to avoid overprotection, since too much reduction can make people less aware of what’s around them and more likely to pull their protection out. For a musician, that means losing touch with the section.

NIOSH’s own guidance for musicians, written by its noise researchers, makes the same point from another angle: some hearing protectors are made specifically for musicians, and the goal is to find what works best for each person (NIOSH, Turn it Down, 2015).

How much protection does an orchestra musician need?

Less than most people expect. NIOSH suggests choosing protection that brings what reaches your ear to about 75–85 dBA. Going far below that rarely helps and can make ensemble playing harder.

A light filter is often a good starting point for quieter seats and chamber work. Players sitting in front of brass, or in a tight pit, may want more. Having two levels can help: a lighter one for rehearsals where you need to hear every detail, and a stronger one for big repertoire or loud sections. If you’re not sure, a sound level meter app can give you a rough idea of your own seat; NIOSH notes that some smartphone apps give useful readings.

How does Big Ear handle this?

For orchestra and classical players, we build The One. It’s a custom filtered earplug with a two-part, analog, non-electronic filter system:

  • a non-linear filter in the canal, built into every pair, which lets everyday sound through and closes down when sound turns dangerously loud;
  • an interchangeable flat filter on the outside, in 9, 15, 20, 25 or 30 dB, that swaps in seconds with no new mold.

The One has an NRR of 25 dB with one filter installed, and since the filters are interchangeable, you can change your level as your music changes. Our general guidance is 25 or 30 dB for very loud settings such as marching band, and 9, 15 or 20 dB for quieter settings. Orchestra seats vary so much that we’d rather talk it through with you than guess, so give us a call if you’re torn between two levels.

Every pair is hand-built in the USA in platinum-cure silicone (Shore A 35), from impressions of your own ears. A custom fit sits the same way every time you put it in, which matters when you’re switching between playing and listening all evening.

The One kitPriceFlat filter setsGood for
Standard$224.951One main setting, such as section rehearsals
Select$299.952Two levels, for example lighter for chamber work and stronger for big repertoire
Premium$574.95All 5, plus hole plug, solid plugs, tactical piece and a casePlayers who teach, gig, travel and want every option

The Select is our best value for most musicians: for $75 more than the Standard, one pair covers two noise levels. If you also want quiet between performances or on the road, our Full Stop Super-Soft solid plugs ($168.95, NRR 32) are made for blocking sound rather than hearing music.

Making the impressions is a simple process that you can do in the comfort of your home. Your order includes a Home Impression Kit with a guided video; it arrives in 3 to 5 business days, takes about 15 to 20 minutes with a helper, and the return postage is paid. Your earplugs are built within 40 business days from the day your impressions reach our lab, and shipping is $10 per order. Every pair is covered by our 30-Day Fit Warranty and a 1-year manufacturer defect warranty against manufacturing defects (loss isn’t covered). Because they’re made for your ears, custom products can’t be returned.

More reading for musicians: our musician earplugs page, the guide to choosing an earplug filter, and tips for music teachers and band directors.

What else helps protect your hearing as a musician?

Earplugs are one piece. NIOSH’s musician guidance and the German study suggest a few habits that add up:

  • Practice and rehearse at lower levels when you can, and keep an eye on how long you play.
  • Rest your ears in a quiet spot during breaks.
  • Ask about sound-shielding barriers between sections, which the German researchers recommended for orchestras.
  • Get a yearly hearing evaluation from a licensed audiologist, as NIOSH suggests. Our post on what a hearing test shows explains what to expect.
  • Protect your ears off the job too. The Toronto researchers named noise outside work as one of several factors behind the hearing changes they saw.

If your ears ring after a rehearsal, hearing feels muffled for more than a day, or you notice new or worsening tinnitus, ear pain or a sudden change in hearing, please see a doctor or audiologist. The same goes if you have ear tubes or recent ear surgery before you wear any earplug.

Frequently asked questions

Will I still hear my intonation with earplugs in?

Flat filters are designed to lower all pitches evenly, so tone and balance stay much closer to normal than with ordinary plugs. Your own instrument may sound a little different at first, especially for winds and brass.

Should I wear earplugs in both ears?

Yes. Sound reaches both ears, even when the loudest section is on one side, so a matched pair protects both and keeps the room sounding balanced.

Which filter should a violinist start with?

In the Toronto study, the string sections had the lowest averages, so a lighter filter in our 9, 15 or 20 dB range is a sensible place to start. If you sit near brass or percussion, a stronger filter may suit you. Call us at (719) 271-4528 and we’ll help you choose.

Do I need a new mold to change filters?

No. The flat filters are interchangeable and swap in seconds in the same earplugs.

Ready to protect the ears you play with?

Your ears are part of your instrument. If you’d like a pair made for them, order with the free Home Impression Kit, try Find my pair to compare options, or call us at (719) 271-4528. We’re happy to talk filters, seats and repertoire.

Sources

Made for this

Custom protection for what you just read about

Stone Hood
Big Ear, Inc. Custom hearing protection, hand-built in the USA since 2003.

Keep reading

Translate »
×

Cart

<<< Sign In or Create an Account >>>

With an account you can check out faster, view your online order history and access your shopping bag or saved items from any device.

<<< View Your Items Here >>>

Choose By Category

Explore All products >>

Choose By Category

Explore All products >>

Choose By Category

Explore All products >>

Choose By Category

Explore All products >>

Choose By Category

Explore All products >>

Choose By Category

Explore All products >>